There is a chip that is present in
every HP color cartridge which works primarily for communicating with the
printer. It is because of this chip that it becomes necessary that you reset
the cartridges after refilling or replacing them. This chip helps in indicating
the message of low in the cartridges. It has been seen that the error message
of low ink would be displayed even after replacing the cartridges and this is
where it becomes crucial that you reset them. When you manually reset the ink
cartridges, it would save a lot of time and money. You would also be saved from
encountering the unnecessary warning of low ink. You can understand this issue
ideally by going through this blog. The users also have the option of promptly
connecting with HP Printer Customer Care Number to avail assistance regarding
this issue.
Steps to reset HP cartridges 57, 28 and 22 are as stated below:
·
After you have
successfully refilled or replaced the cartridges, take a look at the bottom of
the cartridge. You would be able to find six copper contact strips at the
bottom.
·
Make sure that
you keep the cartridge in front of you in such a manner that you can see the
copper strips facing you.
·
Now put a piece
of tape on the top of the contact in the second column.
·
After you have
placed the tape, put the cartridge back into the printer. If you face an error
message ignore it and then print a test page.
·
Now remove the
cartridge from the printer and keep the tape on it. Further place another tape
on the top of the contact which is in the sixth row.
·
You would now
again have to place the cartridge in the printer and print a test page ignoring
the error message.
·
Finally, remove
the cartridge again and take off all the tape that you had put on the contacts.
·
Now when you
replace the cartridge in the printer, you would be able to see that the ink
level is displayed as full.
Opt for cycling the Cartridges
·
You can take up
this option if the first option does not work for you. In this process, you
would require extra color cartridges.
·
Now place the
refilled cartridge in the printer while ignoring the error message that is being
displayed.
·
Take the
refilled cartridge out and then replace it with the spare cartridge. Ignore the
error message that you would receive and choose to print an alignment page.
·
Once you are
done with this step, remove the second cartridge and replace it with the other
spare cartridge that you have.
·
Again opt to
print an alignment page.
·
Once you have
done all the said steps, remove and replace all the spare cartridges with the
refilled cartridges. After you have done this step, you would be able to see
that your ink levels are now shown to be full.
If you feel you would
require more assistance while putting these steps into action, then you can
choose to connect with the HP Printer Tech Support. They would
provide you with all the required assistance in this aspect.
Read more: